Izibizo zomkhiqizo
- Upende we-alkyd, i-alkyd top coat, upende we-alkyd magnetic, i-alkyd anticorrosive coating, i-alkyd anticorrosive top coat, i-alkyd magnetic top coat.
Amapharamitha ayisisekelo
| Igama lomkhiqizo lesiNgisi | Izembozo ze-Alkyd |
| Igama lomkhiqizo wesiShayina | Izembozo ze-Alkyd |
| Izimpahla Eziyingozi Cha. | 33646 |
| Inombolo ye-UN | 1263 |
| Ukuguquguquka kwe-solvent ye-organic | Imitha ejwayelekile engu-64³. |
| Umkhiqizo | Izembozo zeJinhui |
| Inombolo Yemodeli | C52-5-3 |
| Umbala | Imibalabala |
| Isilinganiso Sokuxuba | Ingxenye eyodwa |
| Ukubukeka | Ubuso obubushelelezi |
Ukwakheka komkhiqizo
- I-Alkyd coating yakhiwe nge-alkyd resin, izithasiselo, i-No.200 solvent petrol kanye ne-mixed solvents, i-drying agent njalo njalo.
Amapharamitha obuchwepheshe: GB/T 25251-2010
- Isimo esitsheni: akukho ziqhubu eziqinile ngemva kokuxuba nokuxuba, esimweni esifanayo.
- Ubuncane: ≤40um (inkomba ejwayelekile: GB/T6753.1-2007)
- Okuqukethwe kwezinto ezingaguquki: ≥50% (Inkomba ejwayelekile: GB/T1725-2007)
- Ukumelana namanzi: amahora angu-8 ngaphandle kokuqhekeka, ukubhamuka noma ukuxebuka (Inkomba ejwayelekile: GB/T9274-88)
- Ukumelana namanzi anosawoti: 3% NaCl, amahora angu-48 ngaphandle kokuqhekeka, ukubhamuka nokuxebuka (Inkomba ejwayelekile: GB/T9274-88)
- Isikhathi sokomisa: ukomisa ubuso ≤ amahora angu-8, ukomisa okuqinile ≤ amahora angu-24 (inkomba ejwayelekile: GB/T1728-79)
Ukwelashwa Okuphezulu
- Ukwelashwa kokuqhumisa isihlabathi ebusweni bensimbi kuya ezingeni le-Sa2.5, ubulukhuni bendawo bungu-30um-75um.
- Amathuluzi kagesi ehla aye ebangeni lika-St3.
Ukufanisa inkundla yangaphambili
- I-primer ye-alkyd, upende ophakathi we-alkyd mica.
Imingcele yokwakha
| Ubukhulu befilimu obunconyiwe | 60-80um |
| Inani elinconywayo lamajazi | Amajazi ama-2~3 |
| Izinga lokushisa lesitoreji | -10~40℃. |
| Izinga lokushisa lokwakha | 5~40℃ |
| Isikhathi sesivivinyo | Amahora angu-6 |
| Indlela yokwakha | Kungasetshenziswa ukuxubha, ukufutha ngomoya, nokugingqa. |
| Isilinganiso semfundiso | cishe i-120g/m² (ngokusekelwe kufilimu eyomile engu-35um, ngaphandle kokulahlekelwa). |
| Isikhawu sokumboza
| Izinga lokushisa le-substrate ℃ 5-10 15-20 25-30 |
| Isikhawu esifushane h 48 24 12 | |
| Isikhathi eside akufanele sidlule izinsuku eziyi-7. | |
| Izinga lokushisa le-substrate kumele libe ngaphezu kuka-3℃ ngaphezu kwephuzu lamazolo. Uma izinga lokushisa le-substrate lingaphansi kuka-5℃, ifilimu yopende ngeke ilapheke futhi ayifanele ukwakhiwa. | |
Ukwakhiwa kopende
- Ngemva kokuvula umgqomo, kumele uvuselelwe ngokulinganayo, uyekwe ukuze ume futhi uvuthwe imizuzu engama-30, bese ufaka inani elifanele lokunciphisa bese ulungisa ukuqina kokwakhiwa.
- I-Diluent: i-diluent ekhethekile yochungechunge lwe-alkyd.
- Ukufutha okungenamoya: Inani lokuxuba lingu-0-5% (ngokwesilinganiso sesisindo sopende), ubukhulu be-nozzle bungu-0.4mm-0.5mm, ingcindezi yokufutha ingu-20MPa-25MPa (200kg/cm²-250kg/cm²).
- Ukufutha ngomoya: Inani lokuxuba lingu-10-15% (ngokwesilinganiso sesisindo sopende), ubukhulu be-nozzle bungu-1.5mm-2.0mm, ingcindezi yokufutha ingu-0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ukumbozwa kwe-roller: Inani lokuxuba lingu-5-10% (ngokwesilinganiso sesisindo sopende).
Ukusetshenziswa
- Ifanelekela ubuso bensimbi, ubuso bemishini, ubuso bepayipi, ubuso bemishini, ubuso bezinkuni; futhi ifanelekela ukuvikelwa nokuhlobisa ubuso bensimbi bangaphakathi nangaphandle kanye nobuso bezinkuni, iyipende elisetshenziswa kabanzi ekwakheni, emishinini, ezimotweni nasezimbonini ezahlukene zokuhlobisa.
Inothi
Ukufutha okomile kungenzeka ngesikhathi sokushisa:
- Esikhathini sokushisa okuphezulu sokwakha, kulula ukomisa isifutho, ukuze kugwenywe isifutho esomile kungalungiswa nge-thinner kuze kube yilapho isifutho esomile singashisi.
- Lo mkhiqizo kufanele usetshenziswe ngabasebenzi bokupenda abangochwepheshe ngokwemiyalelo esephaketheni lomkhiqizo noma kule ncwadi.
- Konke ukumbozwa nokusetshenziswa kwalo mkhiqizo kumele kwenziwe ngokuhambisana nayo yonke imithetho nezindinganiso ezifanele zezempilo, ukuphepha kanye nezemvelo.
- Uma ungabaza ukuthi uzowusebenzisa yini lo mkhiqizo noma cha, sicela uxhumane nomnyango wethu wezinsizakalo zobuchwepheshe ukuthola imininingwane.
Ukupakisha
- Isigubhu esingama-25kg
Ezokuthutha kanye nesitoreji
- Umkhiqizo kufanele ugcinwe endaweni epholile futhi enomoya, uvinjelwe elangeni eliqondile, futhi uhlukaniswe nemithombo yokushisa, kude nemithombo yokushisa esendlini yokugcina impahla.
- Uma uthutha umkhiqizo, kufanele uvinjelwe emvuleni, ekuchayekeni elangeni, ugweme ukushayisana, futhi kufanele uhambisane nemithethonqubo efanele yomnyango wezokuthutha.
Ukuvikelwa Kokuphepha
- Indawo yokwakha kufanele ibe nezindawo ezinhle zokungenisa umoya, futhi abapendi kufanele bagqoke izibuko, amagilavu, imaski, njll. ukuze bagweme ukuthintana kwesikhumba kanye nokuhogela inkungu yopende.
- Intuthu nomlilo akuvunyelwe ngokuphelele endaweni yokwakha.
Imibuzo Evame Ukubuzwa Yikhasimende
● Kulula yini ukupenda ama-topcoat amhlophe nanombala okhanyayo ngemva kokusebenzisa i-Iron Red Anti-Rust?
A: Cha, akulula, udinga ukufaka ezinye izimbobo ezimbili ze-topcoat.
● Ingabe i-topcoat ingapendwa phezu kwepulasitiki, i-aluminium kanye nezindawo ezifakwe i-galvanized?
A: Ama-enamel ajwayelekile e-alkyd awakwazi ukufakwa ezindaweni ezingenhla.
